INFRARED THERMOGRAPHY TRAINING

TRAINING INFRARED THERMOGRAPHY

DESKRIPSI

Sehubungan dengan banyaknya kasus-kasus kebakaran akibat korsleting listrik atau pemeliharaan fasilitas listrik yg kurang memadai, bersama ini kami memperkenalkan tehnology dalam bidang Preventive Maintenance, yaitu menggunakan photo infrared thermography untuk menganalisa distribusi panas yang berlebih (OverHeating) pada titik-titik sambungan kabel, komponen listrik (Breaker, Capacitor, Contactor, Fuse, dll.) Tehnology pemeriksaan ini sangat aman dipakai (tidak ada efek samping, baik terhadap peralatan yg diperiksa ataupun lingkungan hidup disekitarnya), effective (langsung mendeteksi titik-titik overheatings & lokasinya) dan efficient (Pemeriksaan cepat, mudah dilakukan, dan tidak mengganggu operational peralatan yg diperiksa).

Technology infrared thermography mempergunakan camera infra merah untuk mendeteksi penyimpangan panas yang terjadi pada peralatan-peralatan listrik & mekanik (ME) yg sedang beroperasi. Setiap gejala kerusakan pada peralatan ME akan menimbulkan distorsi panas (Overheating) dibanding suhu normal operasinya. Pada pemeriksaan infrared akan diketahui secara tepat lokasi yg bermasalah, kondisi peralatan / komponen, mutu sambungan / koneksi kabel-kabel, dan kondisi titik-titik singgung rotary equipments. Dengan demikian perbaikan dapat dilakukan sebelum peralatan-peralatan tersebut mengalami kerusakan / kebakaran.

TUJUAN

  1. Peserta memahami konsep Preventive Maintenance untuk mengetahui dengan tepat lokasi titik-titik yg mengalami overheatings sehingga perbaikan dapat dilakukan sebelum kerusakan tersebut terjadi.
  2. Peserta mampu mendeteksi kebocoran pada pipa-pipa steam atau sambungannya (Flanges, Valves)
  3. Peserta mampu menindaklanjuti laporan Infrared untuk dipakai sebagai acuan sebelum melakukan perbaikan / overhaul, sehingga persiapan kebutuhan suku-cadang dan tenaga kerja dapat dilakukan dengan baik.
  4. Meningkatkan work-place safety dan Citra Management pengelola secara keseluruhan.

MATERI

  1. Introduction
  2. Thermal and Infrared Physics
  3. The nature of Heat and Temperature Heat Transfer Mode Familiarization
  4. Infrared Equipment Operations
  5. Practical Session
  6. Infrared Application Overview
  7. Electrical inspections; Mechanical inspections; Furnace inspections
  8. Detecting Thermal Anomalies
  9. Report Generation
  10. IR software – generic overview
  11. Elements of a good report; Page layouts
  12. Database program; Printing

METODE

  • Presentation
  • Discussion
  • Case Study
  • Evaluation
  • Pre test & Pos Test

PESERTA

Maintenance Manager/Engineers serta Surveyors dan Inspectors yang harus memiliki syarat pengetahuan umum Infrared Thermography

INSTRUKTUR

  • Tugino, ST MT

 

 

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training / Pelatihan 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

Implementation of Electronic Filing and Document Management System (EDMS)

Training Implementation of Electronic Filing and Document Management System (EDMS)

Deskripsi
Era globalisasi dengan perkembangan teknologi informasi dewasa ini sangat membutuhkan karyawan yang menguasai konsep filing document management system, baik dengan metode manual ataupun dengan electronic process. Di dalam konsep tersebut sudah terdiri dari; bagaimana mengelola hard document (paper document) dan soft document ( image document dan manual document).
Pengelolaan image document ( dokumen hasil scanning ) dan manual document (dokumen hasil dari suatu aplikasi, seperti dokumen word processor, spread sheet dan presentation) sangat penting diterapkan dalam mendukung kebijakan management document berdasarkan standar ISO 9001:2001/2008. Apabila konsep filing document management system sudah digunakan dengan baik dan benar dalam suatu organisasi, maka akan sangat membantu memaksimalkan proses pelayanan, baik kepada internal customer ataupun kepada exte(rnal customer, sehingga membuat image yang baik dan meningkatkan daya saing bagi organisasi tersebut.

Tujuan
Setelah mengikuti pelatihan ini peserta diharapkan mampu untuk :
1. Memahami konsep manual filing system dan peralatan pendukukungnya.
2. Memahami konsep electronic filing system dan peralatan pendukukungnya.
3. Memahami faktor-faktor kunci strategis yang menunjang kesuksesan dalam penerapan electronic filling management system.
4. Memahami prinsip-prinsip dan gambaran procedure dari penerapan electronic filling management system.
5. Melakukan proses instalasi software Electronic filing di dalam computernya masing-masing.
6. Melakukan proses instalasi scanner yang digunakan melalui software Electronic filing.
7. Melakukan proses untuk aplikasi Records Management System, Electronic Document Management System dan Electronic Imaging System pada software Electronic filing.
8. Melakukan proses kontrol dokumen berdasarkan konsep ISO 9001:2000, proses distribusi dokumen dan proses updating dokumen pada software Electronic filing.
9. Melakukan proses pengiriman soft document e-mail langsung melalui software Electronic filing.
10. Melakukan proses penyelesaian studi kasus berdasarkan departement masing-masing.

Materi
1. Understanding of manual filing system concept and supporting tools.
2. Understanding of electronic filing system concept and supporting tools.
3. Understanding strategic key factors for success of electronic filing system implementation
4. Understanding principles and procedure illustration of electronic filing system implementation.
5. How using of Electronic filing operation steps for software Installation process.
6. How using scanner Installation process which electronic filing application.
7. How using of Electronic filing operation steps for Records Management System implementation.
8. How using of Electronic filing operation steps for Electronics Imaging System implementation.
9. How using of Electronic filing operation steps for Electronics Document Management System implementation.
10. How using of Electronic filing operation steps for link of Records Management System and Electronics Imaging System.
11. How using of Electronic filing operation steps for Security Management Information System implementation.
12. How using of Electronic filing operation steps for Document Control process.
13. How using of Electronic filing operation steps for Document Distribution process.
14. How using of Electronic filing operation steps for Document Update process.
15. How using of Electronic filing operation steps for Document Sending which e-mail automation process.
16. Case Study from trainer and participants training.

Peserta
Staff, Leader, Supervisor, hingga Manager yang bertanggung jawab dalam proses filing document

Metode
Kegiatan pelatihan dirancang agar peserta dapat memahami secara komprehensif materi yang disampaikan, sehingga dapat dimplementasikan secara aplikatif dalam dunia kerja. Adapun metode yang digunakan adalah:
1. Presentation
2. Discuss
3. Case Study
4. Evaluation

 

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training / Pelatihan 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

Advanced Technology Of Pipeline Design, Construction & Mechanical Integrity

Training Advanced Technology Of Pipeline Design, Construction & Mechanical Integrity

Deskripsi

Pelatihan ini menjelaskan langkah-langkah dan pemahaman tentang pentingnya perawatan rutin dalam perpipaan, karena pemahaman berdasarkan rincian kualitatif, perhitungan, dan teknik sangat penting dalam mendukung keputusan yang kompeten. Pelatihan ini ditujukan untuk menyoroti metode yang digunakan dalam desain pipa dan juga akan melihat ke dalam prosedur apa yang digunakan untuk memelihara dan merehabilitasi jaringan pipa, concentrating on Sewers. Kursus ini juga akan melihat analisis jaringan pipa dan berbagai fenomena dalam pipa

Dalam pelatihan ini akan dibahas pula mengenai persyaratan dalam mendesain untuk proses sistem perpipaan dan persyaratan yang harus dipenuhi terhadap sistem pemeliharaannya. Pelatihan ini menyajikan beberapa contoh kasus yang akan menstimulus peserta sebagai bahan latihan untuk dapat melakukan aplikasi praktis dengan prosedur yang tepat, sampai pada menemukan solusinya.

Program ini dirancang untuk memberikan gambaran yang lengkap dan up-to-date dalam Teknologi Proses Perpipaan. Ini mencakup persyaratan Kode dari desain melalui start-up dari sistem perpipaan baru, serta standar untuk inspeksi dan perbaikan sistem perpipaan yang telah ada, sebagaimana diatur dalam API 570, Piping Inspection Code dan API 579 Fitness for Services. Topik umum dalam pelatihan ini meliputi: Gambaran singkat tentang kode ASME B 31.3, desain tekanan dalam komponen perpipaan, pemilihan flensa, pertimbangan fleksibilitas, material, pengujian dampak, fabrikasi, pemeriksaan dan pengujian. Selanjutnya akan diberikan konsep dan metode untuk menjamin integritas mekanik sistem perpipaan yang ada, yang menyajikan pemahaman menyeluruh tentang bagaimana metodologi API 570 serta API 579 dapat diterapkan untuk menilai integritas struktural komponen perpipaan, dan memutuskan untuk melanjutkan pemakaian. Hal ini juga menunjukkan langkah-langkah perbaikan untuk mitigasi kerusakan dan dengan demikian memperpanjang umur Sistem Perpipaan.

Tujuan

Tujuan dari pelatihan ini adalah:

  • Peserta akan memperoleh pengetahuan yang mendalam tentang pipa dan spesifikasi material yang tepat, manufaktur, proses fabrikasi dan pengaruhnya terhadap kekuatan dan ketangguhan propeti mekanikal, untuk membantu dalam pemilihan material dan failure analysis. Selanjutnya peserta akan memahami dan memastikan integritas struktural total dari sistem perpipaan, pengolahan, dan manfaatnya
  • Peserta dapat memahami latar belakang teknis untuk formula desain, dan aplikasi untuk desain sistem perpipaan dan pipa. Kursus ini membahas aturan praktek yang tepat dalam tata letak sistem perpipaan untuk pengoperasian yang handal
  • Untuk membiasakan peserta dengan konsep utama, dari kode B 31.3, memahami apakah kode ASME B31.3 telah diterapkan dengan benar ataukah belum, dan memberikan kepada peserta langkah-langkah pendekatan dalam penggunaan B 31.3 kode untuk Desain, fabrikasi, inspeksi instalasi, dan pengujian, sehingga persyaratan desain dari Kode ASME B 31.3 dapat didiskusikan dan diterapkan dengan baik.
  • Peserta dapat mencapai tingkat yang lebih tinggi dalam melakukan pemeliharaan yang unggul dalam proses kegiatan industri, dapat melakukan sertifikasi pengujian tekanan, mengetahui tentang inspeksi pipa, teknik mengevaluasi dan menganalisis data Inspeksi, dan dapat mengetahui bagaimana menghitung laju korosi, interval inspeksi dan parameter yang sama pada  inspeksi pipa.
  • Peserta dapat memeriksa dan menerapkan persyaratan pemeliharaan dan pemeriksaan API 570 untuk sistem perpipaan.
  • Peserta dapat memperoleh pemahaman praktis tentang pipa dan pipa modus kegagalan, mekanisme korosi, mulai tahap pengenalan, mengklasifikasikan, sampai pada penyelesaiannya.
  • Peserta dapat mempelajari modus kerusakan sistem perpipaan dan pipa, serta mempelajari mengenai penilaian risiko dan konsekuensi yang akan dihadapi jika kegagalan (dalam pipa) terjadi
  • Peserta akan diperkenalkan dengan teknik terbaru dan penelitian dalam pipa dan pipa integritas untuk menganalisis kondisi terdegradasi baik kerusakan yang disebabkan karena korosi atau mekanis, serta dapat mengenali penyebab degradasi in-service, dan menerapkan teknik analisis integritas untuk membuat run-perbaikan-ganti keputusan. Dengan kata lain dapat mempelajari metode yang tepat dalam melakukan perbaikan, perubahan dan rerating
  • Peserta dapat melakukan desain audit engineering dengan prosedur yang tepat.

Materi

  1. Pengantar
  • Sejarah Teknologi Pipeline
  • Pengantar Piping Codes, Kode & Standar ASME B 31.3
  • Standar API
  • Standar NACA, MSS-SP, PFI
  • Dasar-dasar Integritas dan Pemeliharaan
  • Kategori Fluid Services
  • Pressure Design of Pipes & Design of Blanks
  • Studi kasus tentang pendesainan Pipa
  • Branches and reinforcements
  1. Seleksi Material
  • Aspek Praktis Properti Metalurgi
  • Chemistry and Material Test Reports
  • Pengaruh manufaktur dalam perpipaan
  • Fabrikasi dan spesifikasi Fittings1
  • Persyaratan Material Pipa
  • Mechanical Properties: Kekuatan dan Ketangguhan
  • Teknik Pemilihan Material
  1. Pengelasan
  • Pengantar: Pipe and Pipeline Welding Practice, Fabrikasi dan pengelasan
  • Persyaratan API 1104 dan ASME IX
  • Welding in-service: Tantangan dan Solusi
  1. Strength Integrity for Sustained Loads
  • Operating and Design Pressure
  • Cara Menentukan Sistem Tekanan Desain
  • Introduction to Pressure Relief Valves
  • Formula pengukuran Pipa dan Pipeline beserta aplikasinya
  • Aturan Praktek yang Baik dalam layout
  • Pompa dan Piping Compressor
  • Bagaimana Mendukung Sistem perpipaan
  • Ulasan tentang support types beserta aplikasinya
  • Lesson learned from Poor Support Practices
  • Efek Temperatur (Suhu)
  • Flexibility Layout Analysis
  • Temperature Transients and Fatigue Damage
  • Vibration In Service
  • Mechanical and Hydraulic Induced Vibration in Piping
  • How to Measure Analyze Resolve Vibration
  • Persyaratan Dampak pengujian
  • Preheating dan PWHT
  • Inspeksi, Pemeriksaan dan Pengujian
  • NDT Sistem Perpipaan
  • Tekanan pengujian pipa
  • Pipa Ekspansi Thermal
  • Flensa ASME B 16.5
  • In-service Degradasi pipa
  1. Strength Integrity for Occasional Loads
  • Tekanan Transien
  • Recognizing and Solving Liquid Hammer
  • Pump Station Transients
  • Studi Kegagalan Pipeline Karena Transient
  • Dua-Fase Cair-Vapor Transien
  • Dua-Fase Cair-Gas Transien
  • Gas Discharge Transients
  • Buried Pipe
  • Soil Loads & Surface Loads
  • Expansion of Buried Pipe
  • Soil settlement
  • Kegagalan dalam Pipeline
  • Study Kasus (dalam sejarah)
  • Pemahaman bagaimana bisa terjadi kegagalan dan cara mengatasinya
  1. Penilaian dan Perlindungan terhadap Korosi
  • Pengantar Korosi Praktis
  • Klasifikasi Mekanisme Korosi
  • Penipisan dinding secara umum
  • Korosi Lokal: Galvanic Efek
  • Celah Korosi
  • Pitting Corrosion
  • Dampak Lingkungan
  • Efek Hidrogen dan H2S
  • Korosi Mikrobologi
  • Perlindungan terhadap Korosi
  • Cathodic Protection Overview
  1. Risk Assessment Overview
  • Pengantar risk assessment
  • Risk Criteria
  • API 570 metodologi penilaian Integritas
  • Remaining Life Assesment
  • Probabilitas Kegagalan
  • Third party damage
  • Aspek-Aspek Korosi
  • Aspek-Aspek Pendesainan
  • Pengoperasian yang salah
  • Konsekuensi dari kegagalan
  • Product hazard
  • Spill assessment
  • Dispersion calculation
  • Receptors
  • Risk Representasi
  • Evaluasi data Inspeksi
  • API 579: prosedur penilaian fitness-for service
  • Concept of Remaining strength factor
  • Penilaian general metal loss
  • Penilaian keretakan (crack-like flaws)
  1. Pemeliharaan & perbaikan
  • Flange and Mechanical Joints
  • Ikhtisar Berbagai Jenis Flensa dan Aplikasinya
  • Penyebab Kebocoran Flange dan Cara mengatasinya
  • Studi Kasus Kegagalan Flange
  • Assembly of Flange Joints and Leak Tightness
  • Tekanan dan Pengujian Leak
  • Perbedaan Antara Pengujian Leak dan Pengujian Tekanan
  • Ulasan mengenai Difference Testing Techniques
  • Tujuan dari Test Hydro & Cara melakukan Tes Hydro
  • Pengujian Sistem Pipeline dan piping
  • Pneumatic Testing
  • Teknik Perbaikan & Standart Perbaikan : The New ASME
  • Perbaikan dan sistem perubahan perpipaan
  • Pipe retirement thickness
  • Re-rating pipa yang ada
  • Integritas penilaian pipa tertanam
  • The Fundamentals of Repair package
  • Pipa dan Penggantian Komponen
  • Grinding dan pengelasan

     9. Welded Sleeve: Tipe A dan B

Peserta

Pelatihan ini sesuai bagi mereka yang terlibat dalam desain, analisis, fabrikasi, instalasi, dan pemeliharaan sistem perpipaan, seperti:

Engineers, chief Engineers, Senior Draftsmen, Maintenance Engineers, Facilities Engineers, Mechanical Engineers, Inspection Engineers, Process Engineers, Design Engineers, Planning Engineers, Operations Engineers, Corrosion Engineers, Structural Engineers, Plant engineers in mechanical reliability programs, structure engineer, plant inspectors, central engineering staff, consultants for refining and petrochemicals, and quality assurance personnel who work in the Chemical, Petroleum, Utilities, Petrochemical Plants, Fertilizer Plants etc.

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training / Pelatihan 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

Furnace and Heat Exchanger

Training Furnace and Heat Exchanger

DESKRIPSI

Furnace atau dapur atau ruang bakar adalah suatu konstruksi yang dirancang sebagai tempat untuk mendapatkan proses pembakaran, yaitu proses reaksi secara cepat antara unsur/molekul yang terdapat pada bahan bakar dengan oksigen, sehingga menghasilkan kalor. Kalor yang diperoleh digunakan untuk memanaskan zat yang membutuhkan/dikehendaki. Heat exchanger atau alat penukar kalor adalah suatu peralatan yang berfungsi untuk memindahkan kalor dari suatu fluida ke fluida yang lain karena perbedaan temperatur. Berdasarkan mekanisme transfer kalornya, ada berbagai jenis/tipe heat exchanger. Jenis shell dan tube heat exchanger merupakan jenis heat exchanger yang paling bayak digunakan dalam industri. Hal tersebut dikarenakan oleh kemampuannya beroperasi pada tekanan tinggi, pemilihan bahan yang leluasa, pengoperasian yang mudah maupun efektivitas perpindahan kalor yang tinggi.

MATERI

  1. Tentang berbagai bahan bakar serta sifat-sifatnya
  2. Tentang peralatan bakar yang terkait dengan jenis bahan bakar yang digunakan dan karakteristiknya.
  3. Proses pembakaran yang terjadi di dalam furnace
  4. Alat-alat pengaman dan kontrol pembakaran dalam operasi
  5. Perawatan furnace
  6. Berbagai jenis dan konstruksi heat exchanger serta pemilihannya.
  7. Proses spesifikasi dan desain thermo- hydraulic
  8. Proses desain mekanis dan standard/code yang ada
  9. Arah pengembangan heat exchanger untuk peningkatan transfer kalor
  10. Operasi dan perawatan heat exchanger dan peningkatan reliability heat exchanger
  11. Instrumen dan kontrol operasi untuk keamanan
  12. Aspek ekonomi heat exchanger

PESERTA

Para teknisi, engineer, manajer dan personel bagian operasi dan perawatan pada perusahaan secara umum. Peserta training berpendidikan minimal sekolah menengah kejuruan dari bidang teknik.

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training / Pelatihan 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

Emergency Generator System

Training Emergency Generator System

DESKRIPSI

Kehandalan sistem daya listrik dalam sebuah industri harus selalu dijaga. Dalam kondisi tertentu dan karena sesuatu, misalnya gangguan atau kejadian yang emergency, ketersedian daya listrik yang dibutuhkan menjadi terhambat dan terganggu, dan sementara sistem/plant sangat membutuhkan daya listrik yang stabil untuk menjaga proses produksi yang berjalan. Emergency Generator System adalah sebuah sistem back up daya listrik yang dipersiapkan untuk mengantisispasi berbagai kemungkinan kejadian khususnya kejadian yang sifatnya emergency dan kritis.

Dalam pelatihan ini akan dibahas mengenai sistem generator, kondisi-kondisi yang dikatagorikan sebagai kondisi emergency, serta sistem generator untuk antisipasi kondidi kritis secara teknis.

COURSE OUTLINE :

1.  Model , Struktur Dasar dan Parameter Generator

2.  Model Beban

3.  Aliran Daya

4.  Sensitivitas Tegangan dan Frekuensi Terhadap Beban

5.  Sensitivitas Tegangan dan Frekuensi Terhadap Pembangkitan

6.  Pembagian Pembebanan Generator

7.  Gangguan pada Generator:

  • Insulation Faults
  • Overload, Overcurrent, Overvoltage
  • Unbalanced Loading
  • Rotor Faults
  • Loss of excitation
  • Loss of  Synchronism
  • Kegagalan Prime Mover
  • Overspeeding

8.  Emergency Generator (portable, back up generator)

9.  Instalasi dan interkoneksi

10. Studi Kasus dan Simulasi

PESERTA :

Operator, teknisi, engineering, supervisor

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training / Pelatihan 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

Oil & Gas Applications – Electrical Grounding Techniques

Training Oil & Gas Applications – Electrical Grounding Techniques

COURSE DESCRIPTION

The Oil & Gas sector relies on the efficient transportation, handling and processing of many hazardous and highly flammable chemical products. These operations generate hazardous levels of static electricity. The first line of defence for catastrophic ignition and explosions is proper grounding & static control measures.

Grounding is defined as electrical equipment connected directly to mother earth, or to some conducting body that serves in place of the earth, such as the steel frame of an oil drilling platform. Proper grounding is essential for safely and reliably operating electrical systems. Improper grounding methodology has the potential to bring disastrous results from both an operational as well as a safety standpoint.

There are many different categories and types of grounding principles. This course covers proper grounding techniques for not only medium- and high-voltage systems but also low-voltage Instrument and Control Systems (IACS) that have been proven safe and reliable when employed in process control facilities.

The increased use of electrical and electronic equipment introduces risk of electromagnetic interference (EMI) problems to operations and performance.

As systems are added, they all contribute and could become susceptible to an intense electromagnetic environment (EME).

Controlling Static Hazards is the key to preventing combustible cloud explosions.

Who Should Attend

  • Oil & Gas Electrical Engineers and Engineering Technicians
  • Offshore Oil Installation Engineers & Technicians
  • SCADA System Engineers/Technicians
  • Oil & Gas Project Engineers and Supervisors
  • Oil & Gas Design Electrical Engineers
  • Oil & Gas Engineers responsible for the engineering, design, construction, installation, inspection, operation, or maintenance of electrical grounding systems in Oil & Gas applications
  • Oil Platforms Engineers/Technicians

After Attending, You Will Have a Better Understanding of:

  • Classification Of Various Oil & Gas Grounding Standards. Codes And Rules
  • How to Comply with Oil & Gas Specifications
  • How to Comply with Canadian Oil & Gas Safety and Health Administration Specifications
  • Oil & Gas Emergency Power Systems
  • Petrochemical Storage Tanks Grounding
  • Vessels Grounding
  • Data Highway grounds
  • Logic Manager Grounds
  • Cabinet Ground Connections
  • Explosion Protection grounding
  • Floating, Semi-submersible & Sea Floor Structures Grounding
  • Cathodic Protection
  • External & Internal Lightning Protection
  • Field Transmitter Grounding
  • Grounding for Static Electricity Protection

 

Course Outline

ELECTRICAL GROUNDING – SCOPE

  • Definitions
  • Applications
  • Grounding methods
  • Ground Faults
  • Why Ground Circuits and Systems
  • Grounding Systems

Classification of Various Grounding Standards. Codes and Rules

Electrical Grounding Electrode System

  • Grounding Theory
  • Parameters, Measurements and Calculations
  • Types of grounds: Dirty Ground/Clean Ground
  • Connecting IACS to the ground bed
  • Star Point Ground, single point connection
  • How not to ground
  • Electrical Grounding and Corrosion
  • Installation and Protection
  • Sizing the Grounding Electrode Conductor

CIRCUIT GROUNDING

  • Sources of electrical power
  • Grounded Conductor
  • Direct-Current Systems
  • Alternating-Current System
  • Solidly Grounding system
  • Resistance Grounding
  • MCC’s-Motors grounding
  • Rigging Shore Power
  • External source through shore power cables

EQUIPMENT BONDING & GROUNDING

  • Major Requirements:
  • Identification of the Bonding Conductor
  • Bonding/Grounding and electric Shock
  • Equipment cabinets and hardware items
  • Ground returns & machine grounding
  • Pipelines containing gases or flammable liquids
  • Grounding of arc welding & cutting machines
  • Storage Tank’s grounding
  • Overall Petrochemical plant proper grounding

EMERGENCY POWER SYSTEMS

  • Proper grounding of emergency power systems (generators)
  • Three Pole emergency generator grounding
  • Four Pole emergency generator grounding.
  • Main Bonding Jumper
  • Portable generators
  • Vehicle Mounted Generators

STATIC HAZARDS

  • The hidden dangers in hazardous areas
  • Static discharge ignition of combustible atmospheres.
  • Static in liquids
  • Electrostatic charging of hoses
  • Static grounding protection guidelines for tank trucks
  • Road tanker filling & emptying
  • Mobile grounding for vehicles
  • Railroad filling & emptying
  • Mixing & blending
  • Plastic drums and containers in hazardous areas
  • Vehicle mounted static grounding verification systems.
  • Vehicle refueling

LIGHTNING PROTECTION FOR OIL INSTALLATIONS

  • Electrical Grounding & Lightning
  • Characteristics Protection Systems
  • Electrogeometric & Rolling Sphere Concept
  • NAVFAC Design Guides
  • Ordnance Facilities Protection
  • Storage and Handling Facilities Above Ground
  • Earth-Covered Magazines
  • Cranes on Piers and Wharves
  • Marshalling Yards (Truck and Railroad)
  • Explosives safety requirements
  • Transient Overvoltage Protector Grounding
  • Gas Tubes Metal Oxide Varistors Silicon Avalanche Diodes

ELECTRONIC EQUIPMENT GROUNDING

  • Introduction and Definitions
  • Computer and Electronic Equipment Grounding
  • Telecommunication Rooms and Closets
  • Data Processing Equipment
  • Grounding Electronic Security Equipment Grounding

TELECOMMUNICATIONS GROUNDING IN PETROCHEMICAL PLANTS

  • Grounding Subsystems
  • Exterior Ground Ring
  • Interior Ground Ring –
  • Field transmitter grounding
  • Techniques for floating transmitters
  • Single Point grounding system
  • Equipment & Cabinet grounding

EMI ON ELECTRONIC CIRCUITS

  • Susceptibility – Immunity
  • Cable Shielding and Grounding
  • Losses by Absorption and reflection
  • Grounding Low- and High-Frequency Shielding
  • Grounding High-frequency Shielding
  • Coaxial Cables
  • Superficial Resistivity
  • Resonance and Skin Effect

 

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training / Pelatihan 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

 

BALANCING AND TOTAL ALIGNMENT

TRAINING BALANCING AND TOTAL ALIGNMENT

DESKRIPSI
Pelatihan mengenai alat-alat permesinan Alignment dan balancing. Mengajarkan kepada peserta bagaimana mengoperasian alat-alat tersebut dengan baik dan benar sesuai prosedur penggunaan. Mendidik peserta menjadi mekanik mesin yang handal yang dapat meningkatkan laju performa perusahaan.

TUJUAN
Memberikan pengetahuan tentang balancing dan alignment, ciri ciri misaligned dan bagaimana melakukan balancing, balancing machine dan alignment.

MATERIAL OUTLINE

A. ALIGNMENT
1.Pengantar, klasifikasi alignment dan misalignment
2.Istilah-istilah yang digunakan pada persoalan alignment (indicator sag, soft foot, etc)
3.Peralatan yang digunakan untuk alignment
4.Alignment tolerance
5.Pengambilan data
6.Perhitungan alignment

B. BALANCING
1.Pengantar mengenai balancing
2.Terminologi yang berhubungan dengan balancing
3.Teori balancing
4.Pengukuran sudut fasa
5.Dinamic balancing
6.Balancing tolerance
7.Balancing machine

WHO SHOULD ATTEND
Minimal SLTA yang sudah berpengalaman di bidang permesinan, staf bidang teknik.

METHOD
Presentation
Discussion
Case Study
Evaluation
Pre test & Pos Test

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

Training Power Distribution System : Operation, Characteristic, Protection & Relaying

Pelatihan Power Distribution System: Operation, Characteristic, Protection & Relaying

Deskripsi

“Your Power Distribution System is your backbone”. Istilah ini sering atau mungkin pernah kita dengar sebelumnya. Sayangnya , masih banyak prinsip yang diterapkan  “jika tidak rusak, tidak perlu memperbaikinya”, akibatnya banyak perusahaan, khususnya pada departemen pemeliharaan, rutin membuat perbaikan darurat dengan biaya yang berlebihan, dan mungkin perusahaan Anda juga pernah atau sedang berada dalam situasi seperti ini. Diperlukan adanya prosedur-prosedur efeketif untuk menangani hal ini.

Yang menjadi perhatian lagi, proteksi pada Power Distribution System juga menjadi hal yang penting dan memerlukan pemahaman khusus berkaitan dengan system faults (kesalahan-kesalahan sistem), pendeteksian yang efektif, dan sistem keamanan. Pelatihan ini menyajikan gambaran menyeluruh dan sistematis tentang konsep dan prinsip-prinsip operasi, karakteristik, dan aplikasi skema perlindungan untuk berbagai elemen sistem tenaga listrik, dimulai dengan gambaran kesalahan daya sistem, perhitungan hubungan singkat (short circuit calculations), komponen skema proteksi sistem tenaga listrik, serta sesi penuh pada relay berbasis mikroprosesor dan aplikasi mereka.

TUJUAN

Setelah selesai mengikuti pelatihan ini, diharapkan akan memberikan pengetahuan dan pemahaman kepada peserta tentang prinsip kerja sistem dan peralatan yang berkaitan dengan distribusi dan keselamatan, dimana prinsip koordinasi dalam sistem control dan sistem proteksi dan evaluasi menggunakan sistem koordinasi dan digital sistem koordinasi relay dengan perhitungan arus hubung singkat secara manual maupun melalui software EDSA..

MATERI

  • Gambaran Umum: Komponen Tenaga Listrik dan Fungsinya
  • Karakteristik Beban: Klasifikasi Beban.
  • Protection of electrical distribution system.
  • Jaringan Distribusi.
  • Bentuk Jaringan
  • Level Tegangan
  • Pembebanan Regulasi
  • Grounding System
  • Transformator Distribusi: Tipe-Tipe Transformator
  • Lightning & Transformer Protection
  • Generator & Motor Protections
  • Components of Power System Protection Schemes
  • Co-ordination of Electrical Protection Systems
  • Feeder Overcurrent Protection
  • Pengaturan Tegangan.
  • Tegangan Spread
  • Tegangan Utilisasi
  • Tegangan Zone
  • Feeder-Feeder
  • Metode Peningkatan tegangan.
  • Metode Peningkatan Tegangan dan Faktor Daya.
  • Aplikasi Kapasitor Pada Sistem Distribusi
  • Karakteristik Operasi Sistem Distribusi: Karateristik Arus & Tegangan Sistem Distribusi
  • Fenomena Harmonik pada Sistem Distribusi: Harmonik pd Sistem Berbeban Non Linier
  • Short Circuit Theory
  • Fault Studies
  • Power System Faults
  • Symmetrical and unsymmetrical fault.
  • Short circuit capability.
  • Selection and setting relay coordination.
  • High voltage testing, relay setting and fault simulation using Power System Simulator (PSS) equipment.
  • Short circuit calculation using Electrical Distribution & Transmission System Analysis (EDSA).

Peserta
Pelatihan ini disarankan untuk diikuti oleh:

  • Para Teknisi & Operator, min pendidikan SLTA/D3 dengan pengalaman kerja 3 tahun, yang terlibat dalam manajemen kelistrikan
  • Pihak lain yang dalam tugasnya memerlukan dan terkait dengan materi pelatihan

Metode
Presentation
Discussion
Case Study
Evaluation
Pre test & Pos Test

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

 

Electrical Grounding and Expectations of Future Loads and Method of Calculation

Electrical Grounding and Expectations of Future Loads and Method of Calculation

Introduction:

The first part of this course is intended to prepare the target persons with the ability to perform all electrical grounding system design for Domestic, Commercial and Industrial Facilities and AC Substations.

The second part is to present the proper methods for load calculation calculates. It helps the attendee to understand how to use worksheet to provide an accurate, consistent, and simplified method of determining the minimum size electrical service for a new or existing dwelling looking to add additional electrical load. It helps to prevent oversizing service, which costs more money, and under sizing service, which is a safety/fire hazard.

The course is designed for engineers, new graduate engineers, site field engineers, maintenance engineers and technicians.

Objectives:On completion of this course the target person will be able to:

  • Know all the grounding system terminology,
  • Distinguish between different types of grounding systems,
  • Know design steps for grounding systems,
  • Distinguish the different grounding systems included in Domestic, Commercial and Industrial Facilities,
  • Performing grounding design calculations for AC Substations,
  • Recognize different calculation method for electrical load estimation.
  • Understand the procedures and logic of each method for electrical load estimation.
  • Perform the calculations steps of each method for electrical load estimation.

Course Outlines:

• Introduction to Grounding System Design

• Function of Earthing System

• How Earthing system works

• Advantages/disadvantages of various grounding systems

• The different components of grounding systems,

• Resistance-to-Ground testing

• Determine grounding requirements from soil resistivity results,

• Soil Resistivity testing

• Short circuit level calculations

• Basics of grounding system design

• The required field data for grounding systems design,

• Design steps for grounding systems,

• Design considerations of a grounding grid for medium and high voltage

• The basic principles of grounding in distribution systems

• Ground Potential Rise

• Fault Current Distribution

• Estimation of the Touch and Step Voltages

• Protective or Safety grounding systems

• How grounding can resolve human safety issues in distribution networks

• Safe and unsafe working conditions

• Influenced on Communications/Control Circuits

• Influence on Pipelines

• The impact of lightning strikes on grounding systems

• Ground Impedance Measurements

• Ground Mat Measurements

• Tower Ground Resistance Measurements

• Load Types

• Load Characteristics

• LOAD ANALYSIS

• ESTIMATION OF LOADS

• PREPARATION OF LOAD DATA

• DEMAND AND LOAD FACTORS

• LOAD GROWTH.

• Factors for Individual Facilities

• Building Demand and Load Factor Calculations

• The determination of emergency electric power requirements

• Minimum essential load,

• Uninterruptible load.

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

Training Process Control & Instrumentation

Pelatihan Process Control & Instrumentation

Overview

The course covers the function of basic devices for measuring and controlling different kinds of variables in process control. It Introduces closed-loop control and PID functions, analog and digital devices and programmable logic controllers (PLCs).

Who should attend

This course is ideally suited for process engineers and technicians.

Course content

  • The Nature of Process Control
  • Process variables;
  • On-off control;
  • Measuring data;
  • Controlling variables,
  • Error and feedback;
  • Open- and closed-loop control
  • Elements of Process Control
  • Analog and digital control signals;
  • ASCII; Measuring pressure, level, and flow rate;
  • Digital pulse control;
  • System terminology;
  • Controller action
  • Process Control Signals
  • Linear and nonlinear transducers;
  • Signal operating values;
  • Error; Controller output;
  • Pneumatic and electrical signal transmission;
  • Control loops
  • Process Control Diagrams
  • Symbol recognition;
  • Piping and instrument drawing;
  • Location and installation drawing;
  • Loop and wiring diagram
  • Using Symbols and Diagrams in Process Control
  • Sequence of operation;
  • Flowchart; Switches;
  • Relays; Electrical elementary diagram;
  • Pump system schematic;
  • PLC diagram;
  • Symbols
  • Process Control Loop Operations
  • On-off and proportional control;
  • Controller sensitivity;
  • Typical control loops;
  • Reset;
  • Derivative;
  • Cascade control;
  • Tuning a control loop;
  • Ratio control

 

 

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

Informasi Training Juli – Desember, Indonesia

Almost Running and Running Training July – December, Indonesia

July 2016 Events Venue
19/7/2016 – 21/7/2016

Process Control & Instrumentation

Yogyakarta
20/7/2016 – 22/7/2016 Peak Performance and Emotional Intelligence Yogyakarta
21/7/2016 – 22/7/2016 Excellent Customer Service Yogyakarta
23/7/2016 – 24/7/2016 Leadership Coaching Yogyakarta
26/7/2016 – 27/7/2016 Finance for Non-Finance Managers Yogyakarta
27/7/2016 – 28/7/2016 Coaching and Mentoring Skills Yogyakarta
28/7/2016 – 29/7/2016 Professional Presentation Skills Jakarta
28/7/2016 – 29/7/2016 Successful Selling Skills Yogyakarta
29/7/2016 – 29/7/2016 Filing and Records Management Bandung
29/7/2016 – 30/7/2016 Hypnotherapy Training Yogyakarta
August 2016 Events Venue
10/8/2016 – 10/8/2016 Credit Management and Debt Collection Strategies Yogyakarta
16/8/2016 – 17/8/2016 Negotiate To Win; Secrets to Improve Your Negotiation Effectiveness Bandung
16/8/2016 – 17/8/2016 Telephone Techniques and Handling Difficult Callers Bali
17/8/2016 – 18/8/2016 Secretarial and Administrative Skills Lombok
18/8/2016 – 19/8/2016 Effective Communication, Creative Thinking and Problem Solving for Engineers Yogyakarta
18/8/2016 – 19/8/2016 Power Packed Telesales Jakarta
18/8/2016 – 20/8/2016 Stress Management Retreat (3 days) Yogyakarta
18/8/2016 – 19/8/2016 Training Needs Analysis; Methods, Tools and Techniques Simplified Bandung
22/8/2016 – 22/8/2016 Microsoft Excel – Basic Yogyakarta
23/8/2016 – 24/8/2016 Accounting for Non Accountants with GST Yogyakarta
23/8/2016 – 24/8/2016 Copywriting Skills Intensive Yogyakarta
23/8/2016 – 24/8/2016 Leadership Skills for Managers~ 7 Key Tools for New Leaders Yogyakarta
23/8/2016 – 24/8/2016 Microsoft Excel- Intermediate Yogyakarta
24/8/2016 – 25/8/2016 Professional Presentation Skills Yogyakarta
24/8/2016 – 24/8/2016 Scheduled Waste Management Yogyakarta
25/8/2016 – 26/8/2016 Email and Report Writing Skills Yogyakarta
25/8/2016 – 26/8/2016 Finance for Non-Finance Managers Jakarta
25/8/2016 – 26/8/2016 Microsoft Excel- Advanced Yogyakarta
29/8/2016 – 30/8/2016 Managing Time and Increasing Work Efficiency Yogyakarta
29/8/2016 – 30/8/2016 Positive Mental Attitude Yogyakarta
29/8/2016 – 30/8/2016 Managing Time and Increasing Work Efficiency Yogyakarta
29/8/2016 – 30/8/2016 Managing Time and Increasing Work Efficiency Yogyakarta
September 2016 Events Venue
01-05 September 2016 Pumps and Compressors: Operations, Maintenance and Troubleshooting Yogyakarta
6/9/2016 – 6/9/2016 Instrumentation Systems Control Yogyakarta
6/9/2016 – 7/9/2016 Report Writing; How to Write Simply and Clearly Yogyakarta
7/9/2016 – 9/9/2016 Strategic Negotiation and Deal Making Yogyakarta
20/9/2016 – 21/9/2016 Finance for Non-Finance Managers Yogyakarta
20/9/2016 – 21/9/2016 Persuasive Communication Skills Yogyakarta
22/9/2016 – 23/9/2016 Negotiate To Win; Secrets to Improve Your Negotiation Effectiveness Yogyakarta
23/9/2016 – 23/9/2016 GST Accounting Treatment and Tax Submission (1 day) Yogyakarta
26/9/2016 – 27/9/2016 Technical Report Writing for Engineers and Technical Personnel Yogyakarta
29/9/2016 – 30/9/2016 Emotional Intelligence for Managers Yogyakarta
29/9/2016 – 30/9/2016 PR Writing in the Digital Age; Write with Impact, Influence and Inspiration Yogyakarta
October 2016 Events Venue
11/10/2016 – 12/10/2016 Petty Cash Management Malang
12/10/2016 – 13/10/2016 HR for Non HR Managers Yogyakarta
13/10/2016 – 14/10/2016 Creative and Critical Thinking for Problem Solving Yogyakarta
13/10/2016 – 14/10/2016 Email and Report Writing Skills Yogyakarta
13/10/2016 – 13/10/2016 Personal Data Protection Act 2010 (PDPA) Yogyakarta
17/10/2016 – 17/10/2016 Microsoft Excel – Basic Yogyakarta
17/10/2016 – 18/10/2016 Transformational Leadership – Transforming Manager into Leaders Yogyakarta
18/10/2016 – 19/10/2016 Brand Development and Management Strategies Yogyakarta
18/10/2016 – 18/10/2016 Filing and Records Management Yogyakarta
18/10/2016 – 19/10/2016 Interview Skills- Competency and Behaviorial based Yogyakarta
18/10/2016 – 19/10/2016 Microsoft Excel- Intermediate Yogyakarta
18/10/2016 – 19/10/2016 Performance Management Yogyakarta
19/10/2016 – 19/10/2016 Credit Management and Debt Collection Strategies Yogyakarta
19/10/2016 – 20/10/2016 Successful Selling Skills Yogyakarta
20/10/2016 – 21/10/2016 Budgeting and Cash Flow Forecasting and Reporting Yogyakarta
20/10/2016 – 21/10/2016 Microsoft Excel- Advanced Yogyakarta
20/10/2016 – 21/10/2016 Operation Management Masterclass Yogyakarta
24/10/2016 – 25/10/2016 Handling Full Set of Accounts and the GST factor Yogyakarta
24/10/2016 – 25/10/2016 Positive Mental Attitude Yogyakarta
24/10/2016 – 25/10/2016 Technical Report Writing for Engineers and Technical Personnel Yogyakarta
25/10/2016 – 26/10/2016 Excellent Customer Service Yogyakarta
25/10/2016 – 26/10/2016 Managing Discipline at the Workplace Yogyakarta
26/10/2016 – 27/10/2016 Change Management for Leaders Yogyakarta
26/10/2016 – 27/10/2016 Professional Presentation Skills Yogyakarta
27/10/2016 – 28/10/2016 Administrative Professionals Seminar 2016 Yogyakarta
27/10/2016 – 28/10/2016 Project Management and Implementation; Yogyakarta
November 2016 Events Venue
3/11/2016 – 4/11/2016 Managing Generation Gaps at the Workplace Yogyakarta
8/11/2016 – 9/11/2016 Business Acumen Skills Yogyakarta
9/11/2016 – 10/11/2016 Secretarial and Administrative Skills Bandung
10/11/2016 – 11/11/2016 Minutes Writing Made Easy Yogyakarta
17/11/2016 – 18/11/2016 8D Problem Solving Process Yogyakarta
17/11/2016 – 18/11/2016 Finance for Non-Finance Managers Surabaya
17/11/2016 – 18/11/2016 Report Writing; How to Write Simply and Clearly Yogyakarta
17/11/2016 – 18/11/2016 Successful Selling Skills Jakarta
22/11/2016 – 23/11/2016 Leadership Skills for Managers~ 7 Key Tools for New Leaders Yogyakarta
22/11/2016 – 24/11/2016 Strategic Negotiation and Deal Making Yogyakarta
23/11/2016 – 26/11/2016 Train the Trainer Yogyakarta
24/11/2016 – 25/11/2016 Art of Communication and Closing Sales Yogyakarta
24/11/2016 – 25/11/2016 Professional Presentation Skills Yogyakarta
24/11/2016 – 24/11/2016 Scheduled Waste Management Yogyakarta
29/11/2016 – 30/11/2016 Interpret and Analyse Financial Statements and Cash Flow Analysis for Better Decision Making Yogyakarta
29/11/2016 – 30/11/2016 Managing Time and Increasing Work Efficiency Yogyakarta
December 2016 Events Venue
1/12/2016 – 2/12/2016 Budgeting and Cash Flow Forecasting and Reporting Yogyakarta
1/12/2016 – 2/12/2016 Professional Presentation Skills Yogyakarta
5/12/2016 – 6/12/2016 Email and Report Writing Skills Yogyakarta
6/12/2016 – 7/12/2016 Positive Mental Attitude Yogyakarta
7/12/2016 – 8/12/2016 Negotiate To Win; Secrets to Improve Your Negotiation Effectiveness Yogyakarta
8/12/2016 – 9/12/2016 Coaching and Mentoring Skills Yogyakarta
12/12/2016 – 12/12/2016 Microsoft Excel – Basic Jakarta
13/12/2016 – 14/12/2016 Microsoft Excel- Intermediate Jakarta
13/12/2016 – 15/12/2016 Electrical Grounding and Expectations of Future Loads and Yogyakarta
15/12/2016 – 16/12/2016 Interview Skills- Competency and Behaviorial based Bandung
15/12/2016 – 16/12/2016 Microsoft Excel- Advanced Yogyakarta

Catatan :

  • Semua Pelatihan yang terdapat di web kami dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Pumps and Compressors: Operations, Maintenance and Troubleshooting

Pumps and Compressors: Operations, Maintenance and Troubleshooting

COURSE DESCRIPTION

Program Objectives:

By the end of the program, participants will be able to:

  • Describe the operation of centrifugal and positive displacement pumps including pump design aspects, laws, performance comparisons, characteristic curves and performance testing
  • Test rotary pump performance and apply maintenance and troubleshooting techniques accordingly
  • Identify reciprocating pump types and perform reciprocating pump maintenance and troubleshooting
  • Determine centrifugal pump problems and perform centrifugal pump maintenance and troubleshooting
  • Identify compressor types, how they operate, their common problems, and perform troubleshooting techniques
  • Apply the various methods of pump alignments such as visual, straight edge and feeler gauge, rim and face, reverse dial indication, cross dialing and laser alignment
  • Diagnose soft foot conditions, and apply measurement and correction techniques

PARTICIPANT

This program is designed for plant personnel responsible for the installation and maintenance of positive displacement/ centrifugal pumps and compressors, including plant maintenance technicians and mechanical maintenance technicians. It will also be beneficial for professionals managing and supervising personnel involved in the operation and maintenance of pumps and compressors.

COURSE OUTLINE

Pump Operation and Theory

  • Centrifugal pumps
  • Design aspects
  • Pump laws
  • Positive displacement pumps
  • Performance comparisons
  • Special purpose pumps
  • Pump characteristic curves
  • Performance testing

Rotary Pump Maintenance and Troubleshooting

  • Pump performance
  • Pump tests
  • Pump problems
  • Pump maintenance
  • Pump troubleshooting

Reciprocating Pump Maintenance and Troubleshooting

  • Reciprocating pump types
  • Pump problems
  • Pump maintenance
  • Pump troubleshooting

Centrifugal Pump Maintenance and Troubleshooting

  • Pump problems
  • Pump maintenance
  • Pump troubleshooting
  • Pump inspections
Compressor Maintenance and Troubleshooting

  • Rotary screw compressors
  • Rotary vane compressors
  • Lobe type compressors
  • Reciprocating compressors
  • Lubrication
  • Cooling

Pump Alignment Methods

  • Visual
  • Straight edge and feeler gauge
  • Rim and face
  • Reverse dial indication
  • Cross dialing
  • Laser alignment
  • Mathematical alignment formula calculations
  • Graphical solutions

Soft Foot Correction

  • Soft foot definition
  • Effects of soft foot
  • Types of soft foot
  • Measuring soft foot
  • Correcting soft foot
  • Tolerances

TRAINING METHOD

Lecturing, participative discussion, and case study.

INSTRUCTOR TRAINING

 

Dr. Ir. Viktor Malau DEA. / Teams 

Education Background :
  • Doctor, Genie des Materiaux, Ecole Centrale de Lyon, France, France, September 1994 – September 1996
  • Master, Genie des Materiaux, Ecole Centrale de Lyon, France, France, September 1992 – October 1993
  • Undergraduate, Mechanical Engineering, Gadjah Mada University, Indonesia, August 1978 – April 1985

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

Advanced Power System Analysis in Electrical Network Using ETAP Power Station

Advanced Power System Analysis in Electrical Network Using ETAP Power Station

Course Description

Power systems equipment must withstand not only the rated voltage, which corresponds to the highest voltage of a particular system, but also expected short level. Accordingly, it is necessary to set protective relays based on these results obtained from short circuit study. One of hot issues now related to these is arc flashing study which is mainly based on the studies of short circuit and relay co-ordination as well. All these three issues should be dealt as integral parts & bulk.

Power System Analysis means verifying the adequacy of the power distribution system and it’s components, recognize coordination related disturbances and outages and collecting the required data to perform a detailed required study.

The continuity and quality of electricity delivered safely and economically by today’s and futures electrical power networks are important for both developed and developing economies. The correct modeling of power system equipment and correct fault analysis of electrical networks are pre-requisite to ensuring safety and they play a critical role in the identification of economic network investments. Environmental and economic factors require engineers to maximize the use of existing assets which in turn require accurate modeling and analysis techniques.

Course Objective

On successful completion of this course, participants will be able to:

  •  Understand importance of power system modeling
  •   Understand the need for calculation the short circuit current.
  •   Consequences of sustained fault current & type if faults.
  •   Manual calculation of short circuit using simple methods like MVA method, P.U. system, etc…
  •   Balanced & unbalanced power flow analysis.
  •   Voltage drop
  •   Analyze the motor starting/acceleration.
  •   Switchgear rating (breaking & making capacities).
  •   Power problem problems & assessment.
  •   Importance of arc flashing and relay co-ordination studies from operation & safety point of view.
  •   Test cases simulation using computer software’s.

 

Who Should attend?

This course is intended for anyone who must perform calculations, provide settings or approve the work performed by others. The trainee should be a graduate engineer or have the equivalent practical work experience in electrical power systems. i.e.

  •  Consulting Engineers.
  •   Electrical Engineers.
  •   Project Engineers.
  •   Maintenance Engineers.
  •   Commissioning & testing Engineers

Course Outline

Introduction – Reasons for Faults – and Classification of Faults.

  • Distinction between Load and Fault Current.

  • Sources of Short-Circuit Current.

  • Rotating Machine Reactance Changes (Subtrasient, Transient & steady state).

 Electrical systems modeling and fundamentals.

 Benefits of calculated short circuit currents.

 Fault types & consequences of short circuits.

 Load flow (balanced & unbalanced) analysis.

 Optimal power flow.

 Optimum capacitor locations

  Introduction to Fault current Calculations.

  • Breaking & making currents.
  • Per unit systems.
  • Different typical values of positive, negative & zero phase sequence impedances for unbalance faults.
  • Manual Calculations of Isc by MVA Method.
  • Calculation of Isc by Impedance method.
  • Calculation of Isc by symmetrical components.
  • Calculations as defined & recommended by IEC 60909/ANSI C37 standards.

Different test simulation cases using ETAP power station/CYME PSAF/SKM power technologies.

Short Circuit Studies (Fault-Levels – Switchgear/Fuse Rating). Typical cases for switchgear sizing.

Relay co-ordination & Arc Flashing studies.

Coordination Fundamentals

  • Procedures
  • Data Collection
  • Plotting Time/Current Curves

LV Circuit Breakers, different types

Fuses

Time Delay/Instantaneous Relays

Relay Coordination Intervals

Equipments damage curves for cables, transformers, etc…

  • System earthing (Solid, resistance & reactance or even ungrounded systems)
  • Motor Acceleration Analysis
  • Power Harmonics problems, related issues & assessment
  • Substation grounding grid design
  • DC System Load Flow & Short-Circuit
  • Battery Discharge & Sizing
  • Course Evaluations & Summary

 

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

Grounding and Bonding of Electrical Systems

Grounding and Bonding of Electrical Systems

Description
Grounding and bonding systems ensure that electrical systems are safe from electric shock and fires by limiting the voltage imposed by lightning, line surges, or unintentional contact with high voltage lines as well as a ground-fault. An integrated approach of theory and practice will ensure you have a firm foundation of knowledge when you begin your next design or construction project, or when you encounter problems in your electrical system which must be corrected for safety, operational or power quality reasons.

Case studies will be presented to discuss grounding and bonding applications in a variety of areas (industrial and substation) in order to reinforce fundamental grounding principles common to a variety of applications.

Overview

After participating in this course, you will be able to:

  • Identify and prevent safety hazards to personnel who come in contact with electrical systems
  • Prevent equipment failures and malfunctions by employing proper grounding techniques
  • Interpret codes and standards related to grounding
  • Ensure proper operation of communication, computer and control systems by proper grounding and bonding
  • Apply to your projects lightning protection methods

Who Should Attend
Electrical Engineers • Design Engineers • Managers • Project Managers • Power Quality Specialists • Maintenance Managers • Consultants • Electronics & Controls personnel • Traffic Signal Designers & Operators • Technologists

Courses Outline

Day I

Welcome, Introduction, Workshop Preview, Learning Outcomes and the Assessment Method

Introduction

  • Definitions
  • Electrical code objectives
  • Ground currents
  • Resistance and resistivity
  • Electrical shock hazards

What Is Grounding?

  • Grounding methods
  • Electrical code requirements
  • System grounding – single and multiple services
  • Unwanted current flow
  • Grounding electrodes and grounding methods
  • Effects of emergency generators

Electrical Safety Grounding

  • Common electrical hazards
  • Rules for working around live electrical equipment
  • Electrical safety grounding
  • Electrical code clearances

What Is Bonding?

  • Grounding and bonding – the differences
  • Body resistance and electric shock
  • Bonding definition and purposes
  • Electrical code requirements
  • Methods of bonding and what must be bonded
  • Single point bonding

Other Important Information

  • Ground faults – impedance effects and effective fault paths
  • Earth resistance vs. resistivity
  • Ground fault protection
  • Single conductor cables – circulating and eddy currents

Questions and Answers

 

Day II

Substation Grounding

  • Permissible body currents
  • Step and touch potentials
  • Grounding resistance and resistivity
  • Substation ground electrodes
  • ANSI/IEEE grounding standard

Electronic Equipment

  • Frequency and power quality
  • Frequency response of conductors
  • Minimizing electrical interference
  • Shielding methods

Lightning Protection

  • The nature of lightning
  • Lightning protection principles and methods
  • Protection equipment and grounding methods
  • Surge protection and insulation coordination

Measurement Techniques

  • Ground resistance and resistivity
  • Effects of moisture and temperature
  • Measurement methods

Case Study I – Retrofitting an Existing Installation

Case Study II – Surge Protection

 

 

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

Safety Management Systems (SMS) for Airports

Training Safety Management Systems (SMS) for Airports

About

A successful SMS reduces the rate and cost of accidents and incidents, improves communication and productivity, and helps your airport meet its legal responsibility to manage safety.

Learn how to implement an efficient SMS at your airport and promote a safety culture within your organization. Understand the relevance of risk management in relation to SMS and learn how to evaluate, prioritize and mitigate risk. Analyze the impact human factors have on safety and develop your skills in detecting, controlling and preventing errors in an airport environment.

 

What you will learn

Upon completing this course you will have the skills to:

  • Implement a safety culture throughout your organization
  • Apply the risk management cycle to your organization
  • Integrate safety into aerodrome operations by applying management controls to safety-critical processes
  • Understand how regulatory requirements, State concerns and State Safety Program (SSP) apply to SMS

Course content

Managing risk

  • Risk assessment tools
  • Acceptance of risk
  • Mitigating risk

Implementing SMS

  • Safety culture and policy
  • Hazard identification
  • Risk management
  • Investigating and auditing
  • Documenting and gathering data

Regulating SMS

Managing human factors

Role of the SSP in SMS implementation

ISO 9001 Quality Management Systems (QMS)

 

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

 

 

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

 

GROUNDING PRACTICES

GROUNDING TRAINING

focusing on importance of grounding in the area of generation, transmission and distribution of electrical energy.
Grounding plays a vital role in the power system operation. Single phase tripping of EHV transmission line in case of single phase fault which is the maximum occurring fault can help in improving system stability and reliability. Effective grounding is essential for proper operation and co-ordination of protection schemes as well as for safety of personnel.

More often, not much attention and care is given to the design, construction & maintenance of grounding systems which give rise to problems of mal operation of power system equipment and hazards to the safety of personnel. Besides this, such a situation may prove to be uneconomical in the overall context of planning, design & construction of LV, HV, EHV substations & generating stations.

TOPICS

The major topics covered are as follows:

  • Introduction to Grounding system
  • Measurement and interpretation of Soil Resistivity and Earth Resistance including field demonstrations.
  • Computer aided design of grounding grids
  • Grounding for sensitive equipments.
  • System Grounding
  • Use of chemicals in High Soil Resistivity areas.
  • Grounding for HVDC Stations

 

 

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Power Distribution System Grounding and Transients

Power Distribution System Grounding and Transients

Course Description

Explore the theory and practice of modern power distribution system grounding, transients, protection and operation. Examine the fundamental principles of distribution grounding, analysis tools for distribution system performance assessment and analysis as it pertains to grounding and transients. Review industry practices in grounding, protection and operation of distribution systems. Examine substation grounding because, in most cases, faults in substations determine the maximum transferred ground potential to distribution system grounds. Learn from examples using a powerful analysis and visualization program capable of modeling and analyzing numerous phenomena related to distribution system performance.

Who Should Attend

Electric power utility engineers, system designers involved in design of power distribution installations and operations, consulting and manufacturing engineers, engineers with equipment supply companies for industrial systems, university power system educators and graduate students

How You Will Benefit

  • Explore the theory and practice of modern power distribution system grounding, transients, protection and operation.
  • Learn from examples using a powerful analysis and visualization program.
  • Analyze distribution system performance, including stray voltage and currents in unbalanced distribution systems, lightning overvoltages, influence on nearby metallic pipes,  and interpretation of soil resistivity measurements.

Content

  • Purpose of grounding and safety concepts
  • Distribution grounding practices
  • Ground potential rise calculations
  • Safety standards
  • Computer based design
  • Soil modeling
  • Ground measurements
  • Distribution systems transients
  • Propagation of transients through grounds
  • Fault detection and isolation

 

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

Modern Energy Management Systems

Modern Energy Management Systems

Course Description

Explore the design principles and practical applications of modern energy management systems, ISOs, and RTOs. Examine hardware,software, communications, and user interfaces. Develop a clear understanding of the philosophy of modern power system operations and the role of energy management systems, their design, and actual implementation. Survey past and current practices, as well as trends in the state-of-the-art design of energy management systems. Discuss new requirements imposed by deregulation, open access, and competition.

Who Should Attend

Electric power utility engineers in energy management system design, ISO or RTO design, operations, and planning studies, consulting and manufacturing engineers, engineers with equipment supply companies of hardware/software components for energy management systems, engineers involved in utility work, university power system educators and graduate students

How You Will Benefit

  • Study the control and operation of modern power systems.
  • Review hardware architectures (SCADA, IEDs, computers, and communication components), communication software, applications software, and user interfaces.
  • Review modern user interfaces and visualization methods and discuss new needs and emerging practices imposed by deregulation and open access.

Content

  • Modern energy managemernt systems
  • State estimation
  • Economic operation
  • Network security
  • The smart grid
  • Modern scada systems
  • Distribution management system

 

 

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

Integrated Grounding System Design and Testing

Integrated Grounding System Design and Testing

Course Description

Get comprehensive coverage of grounding system design procedures for safety and lightning shielding. Start with a simplified coverage of the basic principles in grounding design, followed by a step-by-step design procedure.

Explore soil characterization, including soil testing methods, data interpretation and a workshop. Discuss modeling requirements and data preparation procedures for substation ground system design and lightning shielding. Discuss practical examples and see demonstrations of design procedures with three examples of realistic systems — (a) a generation substation, (b) a transmission substation, (c) a distribution substation.

Who Should Attend

Electric power utility engineers involved in substation design, testing and design of grounding systems and engineers engaged in the design and testing of power systems for commercial and industrial installations

Content

  • Grounding system design principles
  • System modeling for grounding design
  • Ground design for lightning
  • Grounding system performance
  • Ground mat design for safety
  • Ground impedance measurements
  • Integrated grounding system design
  • Grounding system testing and evaluation
  • Soil characterization
  • Substation lightning shielding

 

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

 

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

Managing Suppliers and Stakeholders

Training Managing Suppliers and Stakeholders

Training Benefits

This workshop will allow participants to achieve tangible results in terms of:

  • Managing stakeholder opportunities and challenges
  • Recognizing the features of each relationship type and where and how they impact the procurement strategy.
  • Creating win-win outcomes in negotiation
  • Determining the minimum relationship required to deliver the required value.
  • Applying the current trends in relationship management
  • Identifying the drivers of trust in relationships and how dispute resolution is facilitated through strong professional relationships

Workshop Objectives

By the end of the program, participants will be able to:

  • Understand the concept of stakeholder management
  • Engage stakeholders, communicate and negotiate for optimal results
  • Plan and better manage supplier relationships delivering improvements in cost and value
  • Well manage supplier performance management to deliver maximum benefit
  • Build strong, mutually beneficial relationships with strategic suppliers
  • Develop incentives to encourage the supplier to achieve greater excellence

Workshop Outline

Module I – Stakeholder Management

  1. Types and Characteristic of Stakeholders
  2. Stakeholders Strategies
  3. Competitive Advantage with Groups & Teams
  4. Interpersonal Work styles & Skills
  5. Organizational Conflict
  6. Communication and Negotiation Styles

Module II – Supplier Relationship Management

  1. Decentralized vs. Centralized Procurement
  2. Supplier Performance Measurement
  3. Supplier Rating Systems
  4. Strategic Relationships
  5. Implementing SRM Strategy

Target Audience

This training program is developed for professionals, managers and executives who are directly and actively involved in managing suppliers and stakeholders relationships either at strategic or operational level

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Production Resource Planning, Scheduling and Activity Control

Training Production Resource Planning, Scheduling and Activity Control

Integrate production management methods into your operation and keep productivity up…even when the economy’s down. Learn proven techniques for planning, scheduling and controlling production activities. Develop the strategy and systems that let capacity and resources be scheduled most effectively.
This intensive workshop covers the overview of product and service requirements into resource planning and quality control.

Learning Outcomes

Upon completion of this course, delegates should be able to:
  • Achieve world-class manufacturing standards
  • Organize production operations to meet customer needs
  • Reduce lead and cycle times
  • “Build” products that can be effectively scheduled in varying environments
  • Build an information infrastructure that smoothly converts to your manufacturing management systems
  • Develop an understanding of the strategic importance of production resource planning on the supply chains and how resources planning can provide a competitive advantage in the marketplace
  • Design and plan for production, and manage the shop-floor with optimum costs and productive maintenance
  • Learn methods of forecasting to manage capacities and plan production
  • Work through the tools and techniques of cost effective production planning
  • Recognize the significance of purchasing and materials management for continued operations at minimal costs
  • Understand the importance of quality planning and management

Who Must Attend

Plant managers, master schedulers, production activities planners, production control managers, shift supervisors, materials managers, capacity planners, production staff and manufacturing and industrial engineers who interface with operations driving improvement activities in a Material Requirements Planning
(MRP) environment.

Course Details

DAY 1
Module 1: Fundamentals of Production Resource Planning and Control
  • What is Production Resource Planning and Control?
  • Holistic Approach to Production Resources Planning and Control
  • The Customer-Supplier Chain – Functional Performance and Inter phases on the Chain
  • Order Management and Engineering Change Control
  • Enterprise Resource Planning (with Materials Resource Planning)
  • Material requirements planning (MRP)
Module 2: Production Design and Planning
  • Production Capacity Requirements Planning and Control
  • Process & Performance Design, Planning and Control
  • Production Layout and Work-Flow – Efficiency & Effectiveness
  • Equipment Planning & Commissioning
  • Human Capital & Capability Management (incl. Work Study, Job Design and Competency Needs Analysis)
Module 3: Production Management and Control
  • Production & Process Controls (incl. Time and Motion Study)
  • Shop Floor Control
  • Shop floor data collection
  • Standard Costing and Cost Control
  • Cost Management and Reporting
  • Total Productive Maintenance and Tool Management
Module 4: Forecasting, Long-Term Capacity Management and Continual Improvement
  • Sales analysis and forecasting in the supply chain
  • Production forecasting techniques
  • Selecting suitable forecasting methods
  • Calculating optimal production capacity
  • Monitoring production capacity utilization
DAY 2
Module 5: Production Planning and Scheduling
  • Master production schedule (MPS)
  • Item master data (technical data)
  • Bill of materials (BOM) (technical data)
  • Lot traceability
  • Lean Manufacturing, JIT & Operational Efficiency
  • Finite capacity scheduling (FCS) & Bottleneck (Constraint) Management
  • Production & Process Controls (incl. Time & Motion Study)
Module 6: Purchasing, Goods Receiving and Materials Management
  • Purchasing Management –  Sourcing, Purchasing, Procurement
  • Inventories & Orders Control – Warehousing, Stock Planning & Control
  • Sales Order Management & Distribution Requirements Planning (DRP)
  • Packaging, Finished Goods & Warehouse Management
  • Automated warehouse management
  • Logistics Planning & Control
Module 7: Quality Planning, Management & Control
  • Planning the Quality
  • Quality Management & TQM
  • Quality, Speed, Dependability, Flexibility, Cost Trade-offs
  • Quality of conformance and performance
  • Quality of features and aesthetics
  • Quality of reliability and durability
  • Aesthetics and perceived quality
  • Common quality control tools
  • Common quality management tools

 

 

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Fundamentals of Industrial Hygiene

Training Fundamentals of Industrial Hygiene

Industrial Hygiene is the art and science of anticipating, recognizing, evaluating, and controlling workplace conditions that may cause worker injury or illness. If you have recently assumed Industrial Hygiene responsibilities or you have experience in other aspects of the Safety, Health, & Environmental profession and would like to learn more about Industrial Hygiene, then this is the course for you. The course participants will become familiar with the basic terminology, calculation methods, essential concepts and key principles involved in the practice of Industrial Hygiene.

Content

Specific topics covered include regulations, thermal stress, noise, chemical and biological hazards, ionizing radiation, evaluation and instrumentation techniques, control measures, toxicology and physiology.

Agenda Topics

  • Art and Science of Industrial Hygiene
  • History and Philosophy of Occupational Medicine
  • Fundamentals of Toxicology
  • Pulmonary Physiology
  • Biological Agents
  • Ergonomics Overview
  • Legal aspects and introduction to OSHA
  • General Principles of Hazard Recognition
  • Thermal Stress (Heat & Cold)
  • Hearing and Noise
  • Problem Solving lab
  • Ionizing Radiation
  • Hazard Evaluation: Sampling Strategy
  • Direct Reading Instruments
  • Air sampling for gases, vapors and aerosols; plus analysis
  • Principles of Calibration
  • Instrumentation & Equipment Lab
  • Engineering Controls:
  • Industrial Ventilation and other techniques
  • Personal Protective Equipment
  • Respiratory Protection
  • Confined Spaces
  • Indoor Air Quality
  • Implementing a comprehensive IH program (including code of ethics)
  • Course Review

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Fundamentals of Industrial Hygiene (FIH)

Fundamentals of Industrial Hygiene (FIH) Training

Training Goals

Upon completion of the Fundamentals of Industrial Hygiene course, you will be able to anticipate, recognize, evaluate and control physical, chemical, ergonomic, and biological hazards within your workplace.

Who should attend?

The course is designed for safety, health, environmental, and management personnel who have industrial hygiene responsibilities, but limited training or experience in industrial hygiene.

What you’ll learn

Fundamentals of Industrial Hygiene is an essential course to take if you are concerned about the safety, health and general well-being of your co-workers and hazards that could affect them. This is a 4 day (2.6 CEUs) course that develops your understanding of industrial hygiene terminology, principles and practices by examining four key processes in an effective industrial hygiene effort — anticipation, recognition, evaluation, and control. Discussions on when to use a qualified/certified industrial hygienist are held throughout the course.

Coursework focuses on industrial hygiene hazards and controls in general industry.

Topics include:

  • Anatomy & physiology
  • Toxicology
  • Recognition of chemical & physical hazards
  • Recognition of ergonomic & biological hazards
  • Hazard evaluation
  • Evaluation of chemical & biological hazards
  • Evaluation of physical & ergonomic hazards
  • Hazard control
  • Case study
  • Program planning

 

 

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Training Advanced Procurement Management

Advanced Procurement Management

Course Description

The development and implementation of carefully crafted strategies for the acquisition of all goods, equipment, and services has become a critical issue in all organizations wishing to reduce operating cost while improving quality and productivity.

This program explores key concepts forming the basis of strategic procurement and moves though leading edge issues that confront the purchasing organization today.

This fast paced advanced topics program is designed for those wanting to develop high performance purchasing organizations.  This begins with a thorough understanding of what constitutes procurement best practices and then moves to establishing the procurement mission, vision, and knowledge needed to successfully implement the processes and methods needed to reach world-class performance.

Course Objective

Participants attending the program will:

 

  • Review the meaning of strategic procurement
  • See the procurement job descriptions of the future
  • Discuss integration methods
  • Be given examples of best practices in procurement
  • Study supply risk mitigation from the strategic perspective
  • Review how to obtain best pricing
  • Understand methods of focusing on the more important areas of procurement
  • Learn how to improve the image of purchasing operations
  • Be taught how to develop spend analysis
  • Consider Key Performance Indicators (KPI) for Procurement

Who Should attend?

  • Contracts, Purchasing, and Procurement personnel.
  • Project, Engineering, Operational, and Maintenance, personnel who are involved in the planning, and execution of purchases and contracts, and
  • All involved in the acquisition of materials, equipment, and services and who are in organizations whose leadership want high levels of competency in those involved in these activities.

Course Outline

It Is Time For Procurement To Become Strategic.

  • Defining Supply Management
  • Strategic Sourcing
  • New Job Descriptions For Purchasing
  • Identifying Competencies And Weaknesses
  •  Benchmarks For Purchasing
  • Reengineering And Restructuring Organizations

Developing the Procurement Vision & Mission.

  • Developing The Strategic Plan
  • Supplier Classification Systems
  • Supplier Qualification Methods
  • Developing Quantitative Evaluations
  • Supply Chain Management
  • Defining Strategic Supplier Alliances
  • The Strategic Alliance Process

The Steps to Strategic Procurement.

  • Developing Spend Analysis
  • Excel Tools For Analysis
  • Strategic Sourcing Software
  • Methods Of Commodity Coding
  • Commodity Management
  • Developing Key Performance Indicators (KPI) For Procurement
  • Supplier Performance Metrics

The Demand for Continuous Improvement In Total Cost Of Ownership.

  • Driving Down Prices Through Cost/Price Analysis
  • Determining And Tracking Cost Drivers
  • Cost Containment
  • Supplier Collaboration Technologies
  • The E-Reverse Auction-What Is The Future?
  • Improving the Purchasing of Maintenance, Repair, Operating (MRO)

Improving the Image of Procurement.

  • Developing And Maintaining A Customer Focus
  • Integrating Procurement With Other Functions
  • Strategies For Identifying And Managing Supply Risk
  • Exception Management
  • Basic Issues In Corruption And Fraud Prevention
  • Increasing The Level Of Procurement Professionalism

The Centre for Operations and Procurement Excellence

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Advanced Procurement Management Training

Advanced Procurement Management Training

PROGRAM DESCRIPTION

The Advanced Procurement Management Training Program (APMT) is an intensive 3 days’ program and is designed for procurement and related executives who wish to broaden, sharpen and deepen their procurement management competencies. The APMT integrates the latest procurement management concepts and practices to give participants a firm grounding in the advanced skills and knowledge required for a successful Procurement Professional. Case study analysis and business simulation form the core of the program content, reinforced by practical tasks such as experiential activities and negotiation exercises.

PROGRAM OBJECTIVES

At the end of the training, the participants would be better able to:

  • Prepare long-, medium- and short-term procurement strategic & operational plans
  • Develop procurement organization capable of implementing the procurement strategy
  • Lead and manage the implementation of the procurement strategies and plans

PROGRAM CONTENT

Through a critical linkage of leading-edge concepts and best practices, participants will acquire the knowledge & skills to effectively manage the procurement function. The topics covered will include:

  • The concept of strategic & operational procurement management
  • How to craft procurement strategies, plans and programs
  • How to develop the proper procurement organization, policies, systems and procedures
  • How to determine the required procurement manpower requirement — composition, competency & quantity
  • Managing purchasing operations
  • Managing project procurement
  • Managing vendor relations
  • Tender management
  • Contract management
  • Warehouse management
  • Delivery / distribution / logistic management
  • Managing procurement information management system

LEARNING METHODOLOGY

A proper mix of lectures, Q&A, discussions, exercises and case studies.


RECOMMENDED PARTICIPANTS

Senior Procurement and Related Executives who wish to broaden, sharpen and deepen their procurement and related competencies.

This program will surely benefits Project Sponsors, Business Owners, Directors, Managers and Supervisors who also wish to broaden, sharpen and deepen their skills and knowledge of procurement and its strategic implications in today business environment.

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

LOGISTICS, INVENTORY & MATERIALS MANAGEMENT

LOGISTICS, INVENTORY & MATERIALS MANAGEMENT

COURSE DESCRIPTION

This seminar focuses on the largest investment within a jurisdiction second only to personnel, Topics to be covered include inventory management, warehouse management, and the management information systems.

PARTICIPANT

All public purchasing and other officials involved in the management of acquisition, inventory, storage, and disposal process of materials.

COURSE OUTLINE

Section 1: Introduction:

  • Nature of the Inventory Management Job
  • Nature of the Warehouse Management Job

Section 2: Inventory Management:

  • Inventory Definition
  • Inventory Terms
  • Inventory Purposes
  • Definition, Scope and Objectives of Inventory Management
  • Organizational Placement of Inventory Management
  • Inventory Management Planning
  • Methods of Controlling Inventory
  • Determining Stock Levels
  • The Commodity Catalog
  • Stock Issuance
  • Physical Inventory
  • Accounting and Charge Back
  • Stockless Inventory
  • Performance Measurements
  • Customer Service
  • How to Cut Inventory Costs

Section 3: Warehouse Management:

  • Warehouse Management Definition
  • Warehouse Management Terms
  • Types of Warehouses
  • Warehouse Planning
  • Warehouse Management Functions
  • Warehouse Safety
  • Warehouse Security

 Section 4: Management Information Systems:

  • Information Management Terms
  • Computer Hardware
  • Computer Software
  • Networking
  • Management Information Systems Implementation
  • Inventory Information Management Systems
  • Warehouse Information Management Systems

 Section 5: Case Studies:

  • Inventory Management Case Studies
  • Warehouse Management Case Studies
  • Information Management Case Studies

TRAINING METHOD

Lecturing, participative discussion, and case study.

INSTRUCTOR TRAINING

Miftahol Arifin.,ST., MT  / Teams

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Warehouse Management, Material Handling, Storage and Logistics Operations

Warehouse Management, Material Handling, Storage and Logistics Operations

This Course is Designed For:

Warehouse Managers
Supply Chain and Logistics Managers and Professionals
Operations Managers
Logistics Professionals
Inventory Managers
Purchasing and Procurement Managers
Retailers
Inventory and Warehouse Control Professionals
Production Planners
Financial Managers
Project Managers
Distribution Centre Supervisors
Manufacturers and Industries
Academicians, Researchers, NGOs and Practitioners
Those who need to develop their understanding about warehouse management and material handling and storage
Those who are looking for business gains and benefits from managing warehouse

Course programme

Course Contents, Concepts and Issues:

  • Principles of Warehousing
  • Types of Warehouse Operation
  • Functions of Warehousing
  • Warehousing Processes: From Receipt to Storage
  • Receiving
  • Pre-receipt
  • In-handling
  • Preparation
  • Offloading
  • Checking
  • Cross-Docking
  • Recording
  • Quality and Control
  • Storage
  • Warehousing Processes: From Replenishment to Despatch
  • Replenishment
  • Value Added Services
  • Indirect Activities
  • Stock Management
  • Stock or Inventory Counting
  • Cycle Counting
  • The Count
  • Security
  • Returns Processing
  • Despatch
  • The Driver
  • Distribution Centre Concept General Warehousing and Distribution Centre Strategies
  • Design and Layout
  • Design Criteria
  • Handling Technology
  • Storage Plan
  • Data Gathering
  • Space Calculations
  • Aisle Width
  • Other Space
  • Example of Warehouse Layout
  • Looking for Additional Space
  • Personnel Management
  • Warehouse Negotiations, Agreements, and Contracts
  • Warehouse Management
  • Importance of Warehouse Management System
  • Choosing a Warehouse Management System
  • The Process
  • Selecting the Correct Warehouse Management System
  • What to Consider in a Warehouse Management System
  • Warehouse Performance
  • The Role of Industrial Product Packaging
  • Warehousing and Transportation Interface
  • Selecting Warehouse Locations
  • Safety and Security
  • Equipment and Information Technology
  • Unique Functioning and Unique Materials Warehousing
  • Materials Handling and Packaging
  • Concepts of Material Handling and Packaging
  • Kinds of Materials Handling Systems
  • Inventory Management
  • Concept of Inventory
  • Poor Inventory Management
  • Attributes of Inventory
  • Kinds of Inventory
  • Inventory Functionality
  • Buffer Uncertainties
  • Conceptual Framework of Inventory
  • Service Level
  • Categories of Inventory
  • Cost Associated With an Inventory
  • When to Order
  • Economic Order Quantity (EOQ)
  • Classification of Inventory

 

 

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Finance for Lawyers and Legal Professionals

Finance for Lawyers and Legal Professionals Training Course

This Finance for Lawyers training course teaches legal professionals the fundamentals of accounting & finance in an easy-to-understand manner.

The MOST Common Reason Law Firms Go Bust…

…not enough cash flow.

If you’re running & managing a law firm you must know how to manage the finances (even if you have someone managing that for you).

Because if you don’t know what your accountant or financial controller is talking to you about, your firm could be in serious trouble by the time they come to you with their concerns.

Besides understanding the finances of the firm is the only way to know how well the firms is doing.

By attending this training you will be equipped with the skills to:

  • Understand financial accounting, financial reporting and business valuation
  • Discuss financial matters with the CFO or clients on a more equal footing

Who should attend

  • Lawyers in private practice
  • Corporate Lawyers
  • Associate Lawyers
  • Paralegals
  • Legal Secretaries
  • Accountants
  • Legal Executives
  • Compliance professionals

Agenda highlights

  • Overview of Finance in Business
  • Introduction to Financial Accounting
  • The Operating or Income Statement
  • Balance Sheets
  • The Cash Flow Statement
  • Understanding Business Management Ratios
  • The current Global Financial Environment
  • Costs and the Company
  • Investment and Project Appraisal

 

 

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Hedging Interest Rate & Currency Exposures

Training Hedging Interest Rate & Currency Exposures

This training course teaches how to effectively manage your interest rate and foreign exchange currency exposures.

How to Hedge and Manage Your Interest Rate and Currency Exposures

This workshop gives you a framework for understanding how derivatives products are priced and structured by investors, hedgers and financial intermediaries for the purpose of hedging your financial exposures.

Here are just some of the key benefits you gain from this course:

  • How to Manage Corporate Exposures
  • How to Hedge Interest & Currency Exposures
  • Marketing Derivative Solutions
  • How to Structure Effective Hedging Strategies
  • How to Manage Market Risks
  • Learn how to tailor effective hedging strategies, using forwards and options on currency and interest rates and perform comparative analysis between alternative structures and solutions.
  • You will develop an understanding of how originators, investors and financial intermediaries’ interact with each other to execute their hedging strategies and meet your specific business needs.

In addition, a comparative analysis will target the structure and pricing techniques most commonly used in the OTC and exchange-traded derivatives products on interest and currency rates:

  • FRA’s, interest rate swaps, asset swaps, treasury rate locks, forward starts and blend & extends
  • Caps, floors and collars on interest rates
  • FX forwards, FX swaps, cross currency swaps
  • Caps, floors and collars on FX rates

Who should attend

  • Corporate risk managers
  • Corporate Treasury Professionals
  • Bank Treasury Professionals
  • Dealers
  • Capital Markets Professionals
  • Market risk managers
  • Credit risk managers
  • And support area specialists (i.e. audit, legal, trading and sales) who are required to structure, price and/or execute derivatives transactions on behalf of their clients.

Course Outline

  • Overview of the current Corporate Risk landscape, setting the foundation
  • Establish framework for measuring, reporting and managing net exchange positions
  • Establish framework for measuring, reporting and managing IR risks
  • Introduction to foreign exchange markets
  • Currency risk management through use of forward contracts
  • Currency risk management using options on foreign exchange rates
  • IR risk management through use of Forward Rate Agreements and IR swap contracts
  • Floating-rate risk management through use of options on IR’s
  • Bond price risks and assets swaps
  • Interest rate risk management through use of forward-starting swaps and basis swaps
  • Creating Synthetic Securities using swaps and options
  • Documentation
  • Regulations and their impact on markets
  • Collateral Management
  • Commercial Pricing Providers & Open Source Alternatives

 

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

HVAC Systems Fundamentals & Heating, Ventilation and Air-conditioning (HVAC) Systems

HVAC Systems Fundamentals & Heating, Ventilation and Air-conditioning (HVAC) Systems

Course Description

Mastering fundamentals and operation principles of HVAC systems is a must for designers and operators of such systems.   This course covers fundamentals of HVAC systems starting from psychometric calculations to design of air conditioning cycles. Load calculations, distribution, system selection, control, and energy conservation of HVAC systems are all covered in this course. Topics are introduced to individuals who have no or little background on the subject while also providing a valuable information resource to personnel having experience with HVAC systems.

This program is designed for engineers and technicians from a wide range of abilities and backgrounds and will provide an excellent introduction to the fundamentals of Heating, Ventilation and Air-conditioning. It commences with a review of psychometric charts and then examines the factors that influence design choices, indoor air quality, load calculations and heating/ventilation and air-conditioning systems. Numerous tips and tricks throughout the program make it very practical and topical to your applications.

Ether it is a small warehouse or a complex hi-rise building, there is an increasing demand by Owners and Engineers to design and install the HVAC & R systems in a more efficient and cost-effective manner. Due to the ongoing advances in HVAC & R technology, this demand is becoming a must and often controlled by new governmental regulations and engineering codes.

Course Objective

Upon the successful completion of this program, the participant will be able to:

  • Understand and apply the psychometric chart
  • Design for good air quality
  • Perform basic load calculations
  • Minimize forced outages and prevent serious damage to HVAC Equipment
  • Provide an overview of the legislative requirements plus the essential steps and responsibilities for the maintenance and repair of HVAC Systems
  • Outline the technologies available for the efficient energy management using HVAC systems

Who Should attend?

Design and project engineers and technologists, plant and facility engineers, consultants, mechanical engineers and technologists and operation personnel and other technical personnel who need to upgrade/refresh their current knowledge of HVAC systems.

  • Plant engineers
  • Inspection and repair managers, supervisors and engineers
  • Mechanical engineers and technicians
  • Design engineers, electrical engineers and technicians, consulting engineers

 

Course Outline

Fundamentals of HVAC:

  • Refrigeration cycle
  • Type of systems
  • Type of Refrigerants
  • Type of compressors
  • Type of Fans such as backwards fans, forwards fans and centrifugals fans.

 

Determination of Moist Air Properties and the Use of

Psychometrics Chart

  • Moist air properties
  • The psychometric chart
  • Moist air processes

 

Calculations of Air Conditioning Cycles (Systems)

  • Bypassed, return and outdoor air
  • Capacity of refrigerating plant
  • Effect of heat gains in ductwork

 

Determination of Space Conditions – Comfort Zone

  • Comfort-physiological considerations
  • Environmental comfort indices
  • Comfort conditions

 

Cooling/Heating Load Calculations

  • Design temperature differences
  • Quantity of heat to be removed
  • Conduction heat gains
  • People load
  • Loads due to lights and equipment.
  • Infiltration load
  • Ventilation load
  • Radiant and solar heat gains

 

Design of Air Distribution System (Duct Design)

  • Total, static and velocity pressures
  • Changes in pressure in a duct
  • Loss in static pressure due to friction
  • Fan laws and fan performance curves
  • System characteristic curves
  • Fan selection
  • Duct design

Operation of HVAC

System Selection and Control

  • System selection.
  • Control devices
  • Types of control systems
  • Basic control theory

 

Energy Conservation

  • Determination of energy conservation opportunities (ECOs) in HVAC Systems
  • Diagnostics and refining
  • Implementation and maintenance
  • Economic considerations.

HVAC

  • Heat load of a room.
  • Heat load of a multi room complex.
  • The cooling capacity.
  • The airflow rate.
  • The fresh air requirements.
  • The DX systems.
  • The chilled water systems.
  • Chilled water flow rates & piping sizing.

HVAC Design

Chilled water pumps selection.

Building Management System and Control System

DX system piping sizing.

Typical piping connections “DX units, chillers, pumps, AHU’s and FCU’s”.

Insulation thickness & the criteria for condensation prevention.

Duct sizing

Air filtration.

The behavior of the fruit/vegetable after harvesting.

  • How cold stores can extend the life of the products.
  • How to decide the cold room dimensions
  • The heat load of the cold room. (Chilling, frozen products, Potato and Onions)

 

Cold stores design

  • Pre-cooling. “Wet cooling”.
  • Selection of the refrigeration system components.
  • The insulation panels and doors.
  • The docks “Levelers, shelters and doors”.
  • Ventilation for potato and onions.
  • Reference data and tables.
  • Documentation
  • As built hand over package documentation after completion of installation
  • Records and book keeping
  • Questions and answers
  • Case study

 

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.