TRAINING PIPING AND INSTRUMENTATION DIAGRAM AND ENGINEERING DRAWINGS INTERPRETATION

TRAINING PID AND ENGINEERING DRAWINGS INTERPRETATION

COURSE OVERVIEW:

This training course will show how facilities relate to the drawings so that participants can focus on improvements.

  • Accurate drawings and the ability to read and understand these drawings are a requirement for the analysis of emergency situations and the assessment of safety, environmental and regulatory compliance issues such as Process Hazards Analysis / HAZOP studies.
  • It will also provide engineers dealing with Management of Change the ability to speak the same language as the operators of the facilities.
  • It will form the foundation for base level learning and will provide consistent and improved communications between staff.
  • It will provide improvement in quality and consistency which will enhance the other processes that rely on the P&ID drawings.

WHO SHOULD ATTEND:

This course focuses on engineering drawings typically used in the chemical and process industries by engineers and technologists in the design phase and by operations and maintenance staff once facilities are up and running. It is suitable for employees, managers, officers of corporations and anyone else with an interest in how these drawings should be created, maintained and used in assessing emergency situations and regulatory compliance issues.

  • Facilities, Operations and Maintenance Professionals
  • Engineers In Training (EITs)
  • I & C, Mechanical Engineers and Technologists
  • Professionals responsible for Process Hazards Analysis/HAZOP/ Safeguarding studies.
  • Health & Safety / HSE Professionals

COURSE OUTLINE:
1. INTRODUCTION
2. PRELIMINARY ENGINEERING DRAWINGS
• Block Flow Diagram (BFD)
• Process Flow Diagram (PFD)
• Material Balance
• PFD Symbols
3. PIPING AND INSTRUMENTATION DIAGRAMS
• Piping and Instrumentation Diagram (P&ID)
• P&ID Symbols
• Line Numbering
• Valve Numbering
• Equipment Identification
• Abbreviations

4. PIPING AND INSTRUMENTATION DIAGRAMS
• Piping and Instrumentation Diagram (P&ID)
• P&ID Symbols
• Line Numbering
• Valve Numbering
• Equipment Identification
• Abbreviations
5. INTERPRETING P&IDS – VALVES
• Valve Types
• Valve Identification
• Valve Fittings
6. INTERPRETING P&IDS – EQUIPMENT
• Vessels
• Pumps
• Heat Exchangers
• Compressors
• Equipment Identification

7. INTERPRETING P&IDS – CONTROL & SAFETY SYSTEMS
• Distributed Control Systems (DCS)
• Safety Instrument System (SIS)
• Instrument Symbols
• Instrument Signal Lines
• Pressure Instruments
• Temperature Instruments
• Flow Instruments

8. DETAILED ENGINEERING DRAWINGS
• Plot Plan
• Electrical Area Classification
• Piping Drawing
• Isometric
• Material Take Off
• Line List
• Tie-in List
• Shutdown Key
9. ENGINEERING DRAWINGS FOR CONSTRUCTION AND OPERATION
• Developing As-Builds
• Preparing for a PHA (HAZOP, What-If, etc)
• Management of Change (MOC)

TRAINING METHOD
  • Group Discussions
  • Group & Individual Exercises
  • Presentations
  • Games
  • Case Studies
  • Role Plays
  • Self-Assessment
  • Action Plan
FACILITIES
  • Certificate,
  • Quality Training Kit (Pencil case: Erase, Bolpoint, Pencil, Tipe X, Stabillo, Flash Disk 8 GB),
  • Bag.
  • Training Material (HandOut & SoftCopy)
  • Convenient training facilities in stars hotel (Public Training)
  • Lunch and Coffee Breaks (Public Training)
  • Souvenir
Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.
Catatan :
  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Trainingdengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.
  • Peserta bisa mengajukan Tanggal Pelatihan / Training selain yang tertera pada silabus penawaran.
Info Jadwal Training , Training, Training di Bandung, Training di Jakarta, Training di Bali, Training di Yogyakarta, Training di Lombok, Training di Surabaya, Training di Malang, Training di Solo, Training di Medan, Training di Manado, Training di Batam, Training di Semarang, Training di Bogor,

Applied Reservoir Simulation

Training Applied Reservoir Simulation

This course will introduce participants to the theory and practice of reservoir simulation.  Participants will learn about the fundamentals of reservoir simulation, the development of simulation programs, and how to select the proper model for a simulation study.  This course will also cover data preparation, grid design, calibration of the reservoir model, forecasting of future performance, and interpretation of simulation results.

Participants will also be introduced to several advanced topics including: pseudo-relative permeability and capillary pressure, understanding the role of simulation in reservoir management, the mechanics of reservoir simulation limitations, and the structural aspects of the models.  Upscaling and simulation techniques will also be discussed.  ECLIPSE software will be used during the tutorials, however prior experience with the program is not required.  During this course, participants will be expected to solve problems in a workshop format using related software applications.

PARTICIPANT

Engineers, geologists, geophysicists, managers, and other oilfield technical staff.

Day 1

Reservoir Analysis and Simulation 

  • Classical analysis
  • Characterizing the reservoir
  • Reservoir simulation overview
  • Benefits of reservoir simulation

Day 2

Reservoir Data Preparation 

  • Data preparation
  • Porosity
  • Permeability, relative permeability, capillary pressure
  • Hysteresis
  • Fluid Properties – PVT
  • History matching

Day 3

Well Models

  • Fine grid simulations
  • Single well studies
  • Cross-sectional models
  • Areal models
  • Grid orientation

Day 4

Grids 

  • Coarse grid models
  • Simulation grids
  • Local grid refinements
  • Modeling faults
  • Rock, block, and well properties in a coarse grid
  • Fractured reservoir simulation
  • Simulation walkthrough
  • Overview of simulation process
  • Conducting a study
  • Overview of compositional simulation

Instructor

IR. BAMBANG BINTARTO, MT.

EDUCATION

2000 : Lulus S2 Teknik Perminyakan, Institut Teknologi Bandung (ITB)
1991 : Lulus S1 Teknik Perminyakan, Universitas Pembangunan Nasional (UPN) “Veteran” Yogyakarta.
 

SIMULATION SOFTWARE SKILLS

IMEX : Black Oil Reservoir Simulator, Computer Modeling Group (CMG)
GEM : Compositional Oil Reservoir Simulation, Computer Modeling Group (CMG)
ECLIPSE : Black Oil Reservoir Simulator, Schlumberger – GeoQuest
Kappa-saphire : Well Test Analysis
MBAL : Material Balance

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.
  • Peserta bisa mengajukan Tanggal Pelatihan / Training selain yang tertera pada silabus penawaran.

Informasi Jadwal training / Pelatihan 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya